So the first thing the little limp lion now needed was some sort of lightweight stiffener for the chalkbag itself. Coincidentally, we had some foamed rubber lying around, so that got conscripted, cut into a fitting wide strip, and sewn together to make a tube.

löwe_03

You can see the lion is so excited about this that it has turned itself inside out! It was a very nicely made toy, by the way, with neat and sturdy seams all around.

The inner tube needed to be fixed to the inside of the lion to make sure it stayed in place. Some of that fixing was achieved with a few stitches right at the befginning, the rest was done by stitching the fleece liner to the bottom of the lion skin.

Next step was sewing and attaching a pocket to the inside of the lion's back. This also serves as lining for the inner back. The pocket is big enough to hold a phone, which is important as our friend likes to take his phone along and snap a pic or two when he's bouldering.

löwe_04

While mucking about with the lining, it quickly became clear that the foamed rubber will provide enough stiffness vertically, but that the opening would deform too easily... so some stiffening for the upper rim was needed, too.

You'll see that one attached... in the next post!