Latest Comments

Katrin How on earth did they do it?
27. März 2024
Ah, that's good to know! I might have a look around just out of curiosity. I've since learned that w...
Heather Athebyne How on earth did they do it?
25. März 2024
...though not entirely easy. I've been able to get my hands on a few strands over the years for Geor...
Katrin Hieroglyphs.
23. Februar 2024
Yes, that would sort of fit that aspect - but you can also go from bits of woods to sticks if you ar...
Bruce Hieroglyphs.
23. Februar 2024
I think the closest English equivalent would be 'Down the rabbit hole'. It has one entrance (No, not...
Harma Spring is Coming.
20. Februar 2024
I'm definitely jealous! Mine disapeared except for one pathetic little flower. But the first daffodi...
APR.
30
0

Mask Making Adventures (part III)

With the basic shape of the mask done, it now needs side, top and bottom seams; some way of adjusting shape and fit over the nose; and some means of fixing it to the wearer's head. So let's get those done too...

First of all, top, bottom and side seams. This basically means folding under the seam allowances and stitching the seams. I opted for a running stitch along the top, and for a whipstitch along the bottom of the mask.

Before closing up the mask at the sides, the nose wire has to go in. I used two trash ties that I twisted together; in the first try, I had a strip of metal from a filing thing, and that was too wide for my facial anatomy, which means it tends to press down on my nose with one of its edges. Not very comfy.

[caption id="attachment_5253" align="alignnone" width="640"] Two trash ties...


[caption id="attachment_5252" align="alignnone" width="640"] ...twisted together...


[caption id="attachment_5251" align="alignnone" width="640"] ...and stuck into the mask at the nose part.


Getting the nose wire in is, again, a little fiddly. It also helps to not work the nose part seam from the very edge of the mask, like I did, because then there's no space to fit the wire... unless you take out a few stitches again. (Which is what I did. Obviously.)

I fiddle around until the wire is where it is supposed to be, then press it into the edge seam and stitch right below it.



For the sides, where the edges got folded under and then stitched together, I used the Viborg variant again. Another way would be to leave a wider seam allowance for the outer fabric, fold the lining allowance under, stitch a line to fix that and the folds, and then work the extra outer fabric into a tunnel for a strap.

[caption id="attachment_5250" align="alignnone" width="640"] Starting the side seam - folding the edges to the inside, and then folding the folds up again.


[caption id="attachment_5249" align="alignnone" width="640"] The wonderful Viborg seam again! I'm going over the first two layers on purpose in this instance.


Final step: the attachment points. There's several different ways to hold a mask to one's head, the simplest of which is elastic loops that are pulled over the ears. That's something I don't find too comfy. Instead, I made loops that are a bit longer from proper ribbon; these, in turn, get equipped with a bit of elastic that closes at the back of the head, either with a tiny quick-release buckle or some other type of fastening; in this case, with a sturdy press stud. Because I was lazy, it closes on one of the ribbon loops instead of in the middle (which would have meant one more bit of sewing...)



Finished!



And here's the side view:



It fits well, it's rather comfy to wear, and the extra fabric integrated through the folds means a considerable plus of surface area. That gives us the impression of making breathing a bit easier, as there's more space to suck air through. It will definitely make the mask stay dry-ish for longer, too (more fabric means more capacity for taking up moisture before the mask is too wet for practical purposes, and also more surface area for evaporation).

We've tried them out on the bicycle, and while riding without a mask is still much nicer, it went surprisingly well. The good fit of the upper part means no or almost no steaming up of glasses even when waiting at traffic lights, and impact on breathing is mostly noticeable when going uphill. So definitely a use-able pattern for us.

 
0
APR.
29
0

Mask Making Adventures (part II)

So, as promised, more about my mask-making adventures!

In case the following things tempt you to try something similar yourself, this is probably a good time to warn you that I quite enjoy fiddly sewing once in a while. You might, too - then go ahead and do things. If you like your sewing nice, easy, and un-fiddly... try this at home at your own risk.

While we do own a (very simple, pedal-driven) sewing machine, we made our masks by hand-stitching. I just like that better, and I'm not very good with a sewing machine, and also I wanted to use medieval-type stitching to be able to join in Karina Grömer's #historicalmaskchallenge on Instagram.

So. Mask-making, second try: This time I did test the breathability of my fabric combination first. I then adapted the pattern by making two folds, each about 2 cm deep, into a sheet of paper and transferring the shaped pattern outline to the folded-up paper. Un-fold, and there you have the adapted pattern. I made sure the folds do not overlap to avoid having a gazillion layers of cloth on the side of the mask.



Next step was transferring this to the lining cloth. I did this by drawing around the paper pattern with charcoal (my preferred means of drawing on cloth), then flipping the paper over and drawing the second half right next to the first. The wiggly bits in the middle don't fit together, but hey, it's just guidelines anyways, right?



(Yes, there is very little seam allowance at one spot. I know how I sew, and what stitch I will use for that section, though, so I also know that  I can get away with that.)

I then placed the cut-out lining on the fabric for the outside of the mask and cut that out accordingly. Consequently, there's only one piece of fabric with the mask lines drawn on it; if you want or need the lines on both, you'll have to trace around the paper pattern instead.



Next up was basting the two parts together to make the following things a little easier. I basted three lines, one each close to the outer edges (but far enough in so that I can fold the seam allowances to the inside) and one down the midline.

[caption id="attachment_5238" align="alignnone" width="908"] You can barely see the basting, but you can see the ends of the basting threads hanging out of the fabric on the top and at the bottom of the sides.


Once that was done, the next step was ironing in the folds. I did this after sewing on my first mask in this style, but realised it would be much easier to do it on a flat piece afterwards. There's two lines to iron in for each fold; moistening the fabric a little did help in making the creases nice and sharp, and the basting helps to keep the layers from moving against each other.

[caption id="attachment_5237" align="alignnone" width="493"] Ironing in the second crease of the first fold (and you can see the basting stitches better here)


[caption id="attachment_5236" align="alignnone" width="499"] ...and all folds are folded and ironed here.


Next step: sewing the shaping bits in the nose and chin section. This is where it gets fiddly, and also where I get to use a stitch snatched from the 11th century linen shirt found in Viborg Søndersø. I cut the triangular bits, leaving a bit of a seam allowance, and lengthening the cut a bit more on the lining fabric than on the outer fabric:



Then the seam allowances are folded in, and the edges get whipstitch-varianted together. You go over the first of the four parts with the needle and through the other three, then repeat this from the other side.

[caption id="attachment_5232" align="alignnone" width="515"] I actually went over the first two layers in this stitch and through the second two. Oops.


The result of this technique is a very neat seam that can be pressed completely flat and does not feel bulky. It's also very pleasant to work, in my opinion, so I'm very fond of this kind of seam.

The nose part gets stitched up just like the chin part. It gets fiddlier the closer you get to the end of the cut - which is why I make one cut a little longer. Once I run out of cut in the outer fabric (having the inside towards me as I work), I stitch only through the inner fabric.





This closes up the last bit of the gap, and makes for a neat finish.

Now the mask has an actual shape - but there's a few more steps to go...



...which will follow tomorrow.

 
0
APR.
28
1

Mask Making Adventures (part I)

Here in Bavaria, it's now obligatory to keep mouth and nose covered in public transport and in shops.* This means either a disposable mask, a shawl or scarf or something similar, or a fabric mask - and I definitely prefer the latter, due to a) sustainability, b) best possible fit, and c) the possibility to make it nice, and fun, by using appropriate fabrics.

There's been a little bit of a false start to my masking adventures, though. General guidelines tell you that you're supposed to use a "densely woven fabric"... well. Apparently my definition of "densely woven" is a bit different from the intended one, because the first cloth combination I chose will stand in very well as equivalent to high-altitude training. Breathing muscle training, anyone?

So if you're in a similar situation - needing a cloth mask and being willing to make one yourself - here's my first bit of advice for you: Take the fabric combination you are planning to use and place it closely over your nose. Breathe in and out. It should feel normal, or almost normal, with no significantly increased resistance to the airflow. If you do feel significant resistance... it's probably not a good idea to use that combination.

For the mask-making itself, there's two different types, the rectangular one with folds (modeled after the simple disposable medicinal masks) and the form-fitted one. For both types, including a malleable metal thingummy in the nose section is a very good idea, as the mask won't fit properly otherwise.

We opted for the shaped masks for ours, and I found a download link to a pattern (on the website of the soccer club Hertha BSC, of all places!) that came in different sizes, as opposed to the many patterns in just one size. Important for me, because I have a rather small face; so small, in fact, that I wear children's glasses. So accordingly, I opted for size S.

Which does fit me. However... if you know me in person, you'll know that I like to talk. A lot. Almost all the time. Talking with the mask is, however, not so much fun... so I decided it would be a good idea to combine the fit of the shaped mask with the extra room for movement provided by the folds of the rectangular mask... and hence, some mask-making shenanigans ensued.

Which you will hear more about tomorrow!

 
*There is considerable discussion about whether this is a good or a bad idea, just like there is considerable discussion as to the function of these masks. They will definitely help at holding in your own outbreath aerosols, and stop or at least reduce your virus output if you are infected. This is especially the case if you sneeze or cough, though you are supposed to use your elbow in addition even if you're wearing a mask.
Though current state of research is that home-made cloth masks are usually not as effective as medicinal masks in keeping in your potentially dangerous output, they can reduce it significantly, depending on the kinds of material used. According to my status of information, jury's still out on whether they will also protect their wearer by reducing the chance of other people's virus-laden aerosols from getting directly into your mouth and nose. Common fabric is definitely not closely meshed enough to keep out viruses (especially not if you choose fabrics you can still breathe through, see above); you need special filtering material for this, and the mask then has to fit very well to be protective. Common advice still is to treat the thing as if it would be protective, which means both treating it as if it might be contaminated on the outside after use, and getting rid of the viruses caught on the mask by a hot wash or ironing.
0

Kontakt